Electric Vehicle Charger Installations

Circuit Science Inc

Full Service Electrical
Solutions

Serving West GTA and Niagara Regions

ESA/ECRA# 7007167
Electric Vehicle (EV) chargers come in three main types: Level 1, Level 2, and DC Fast Chargers. Level 1 chargers use a standard 120-volt outlet, making them the most accessible and affordable option, but they are slow, typically taking 20-40 hours for a full charge. Level 2 chargers require a 240-volt outlet and significantly reduce charging time to 4-8 hours, making them ideal for overnight home charging. They strike a balance between cost and efficiency, with installation costs typically ranging from $500 to $2,000. DC Fast Chargers are the fastest, providing an 80% charge in just 20-30 minutes, but they are more expensive to install and are usually found in public charging stations rather than homes. The choice of charger depends on your daily driving needs, budget, and how quickly you need to recharge your EV. 
 Do I need More Power?

The Process

A service upgrade from 100 amps to 200 amps involves several key steps to ensure your electrical system can handle the increased load safely and efficiently. Here’s what’s typically involved:
Assessment and Permits:
A thorough evaluation of your current electrical system is conducted to determine the specific needs of the upgrade. Permits are then obtained from local authorities to comply with building codes.
Utility Coordination:
Utility Coordination: Your electrical utility provider will be involved to disconnect power during the upgrade process and reconnect it once the work is completed.
Meter and Panel Upgrade:
The existing electrical meter and service panel are replaced with higher capacity units. This may involve upgrading the meter base, installing a new 200 amp panel, and replacing or updating the service entrance cables.
Rewiring And Circuit Upgrades:
Depending on the age and condition of your wiring, some circuits may need to be upgraded or rewired to handle the increased capacity safely.
Inspection:
After the work is completed, an inspection is performed by a local building inspector to ensure the upgrade meets all safety and code requirements.
Impact on Occupancy:
During the service upgrade, there will be a temporary power outage as the electrical system is disconnected and reconnected. The duration of this outage can vary, typically lasting several hours. Occupants should plan for limited access to electricity during this time, which may affect heating, cooling, lighting, and other electrical appliances. However, once the upgrade is completed, the enhanced capacity will support current and future electrical needs more reliably, reducing the risk of outages or overloads in the future.

What it Costs

The costs involved in upgrading from a 100 amp to a 200 amp electrical service can vary based on several factors, including the specifics of your property, local labor rates, and the complexity of the upgrade. Here’s a breakdown of the typical costs:
Permit and inspection Fees:
ESA permits are required for a service upgrade, and the cost can range from $250to $350, depending on your location. An inspection fee is also included in this cost as well as the coordination by ESA to restore power with the local utility.
Materials:

Service Panel:

A new 200 amp panel typically costs between $100 to $500, depending on the brand and features.

Meter Base

The new meter base costs around $125 to $200.

Cables and Conduits:

Upgrading service entrance cables and any necessary rewiring can cost between $500 to $1500, depending on the type, length and complexity.

Miscallaneous Materials:

Additional materials, such as breakers, connectors, and conduit, can add another $250 to $1200. Although much effort will be directed to reusing as much of the existing equipment as is possible such as breakers, most other equipment is concidered recyclable and will be removed unless requested by owner.
Labour:
Labor is the most significant cost component. Electricians generally charge between $50 to $150 per hour, depending on the region and their level of expertise. For a standard upgrade, labor costs can range from $500 to $2,000, depending on the job’s complexity and the time required. The current labour rate for an electrician will vary from company to company but span from $85 to $155 ( larger companies ). It will usually require 1 electrician and a helper/apprentice to complete the job.
Additional Costs:
Disposal and Recyling of removed equipment. Some materials require special handling and disposal.
Utility Fees:
In some cases, the utility company may charge a fee for disconnecting and reconnecting power or for upgrading the service drop to your home. This can range from $1600 to $750, depending on the utility provider. Areas affected include Toronto, Oakville and other remote areas.

Contact Us now!

Need Answers Quick? 
Fill out the form!

Contacts

905 616 2987

info@circuitscience.ca

Circuit Science Inc

2011